GE Smart Lighting Control Add-On Switch

$24.99
SKU# 12723-P1   |   You have items in your cart.

xFeatures

Whole Home Control

The GE Add-On Switch requires a GE Smart Control and will not work as a stand-alone switch. Compatible with all In-Wall GE Smart Controls, Switches, Dimmers and Fan Controls.

Controls any lamp, any bulb

Works with all LED, CFL, halogen and incandescent bulbs, and other devices. Control and schedule wall and ceiling lights.

Full Control

The GE Add-On Switch mirrors the functionality of the GE Smart Control with which it is paired. Unlike traditional lighting controls, all paired switches perform the same functions.

Easy to Install

Replace your existing switch in as little as 15 minutes. Includes space saving screw terminals and neutral jumper wire.

Description

Transform any home into a smart home with the GE Smart Lighting Control Add-On Switch. This Add-On Switch replaces your current switch, uses existing wiring and provides your home with ultimate flexibility when combined with a GE Z-Wave, ZigBee or Bluetooth In-Wall Smart Switch, Dimmer or Fan Control. The GE Smart Lighting Control Switch operates as your home automation system primary control, requiring three-way or four-way wiring configurations. Three-way wiring configuration turns the light or appliance on or off from two separate locations. Four-way wiring configuration turns the light or appliance on or off from three separate locations. With an interchangeable paddle design, the paddle switch matches most standard wall plates and home decor, and includes white and light almond paddles that will match most standard wall plates (wall plate not included). This product is ALEXA COMPATIBLE, however, it REQUIRES AN ALEXA SUPPORTED HUB for voice control with Echo Products (Alexa device and hub sold separately). **This product CANNOT connect directly with ECHO PLUS (Only ZigBee products can connect directly to Echo Plus).**

Features

  • Provides ultimate flexibility with your GE In-wall Smart Switch, Dimmer or Fan Control
  • Requires a GE Home Automation Switch, NOT a standalone switch
  • Includes white and light almond paddles that will match most standard wall plates (wall plate not included)
  • Screw terminal installation provides improved space efficiency when replacing existing switches compared to flying leads (Neutral connection required for installation)
  • Compatible with GE In-Wall Z-Wave, Bluetooth, and ZigBee Switches, Dimmers and Fan Controls

Technical Specifications

Specification Value
Power 120VAC, 60Hz
Operating Temp. Range 32-104°F (0-40°C)

Manuals

Manual Name Language Download
12723 manual English English Download
12723 manual Spanish español Descargar
Zigbee Catalog English Download

How-To Videos

GE Z-Wave In-Wall Add-On Switch installation

FAQ

Does this work with Amazon echo / Google Home?

All of the GE Z-Wave smart lighting controls must be connected to a supported hub in order to interact with the Amazon Alexa / Google Home services. Note: It will be necessary to review supported hubs with each service, as both may have different supported hubs. At the time of this publication, SmartThings, Wink, Lowes Iris, and Nexia are currently supported by the Alexa service and SmartThings is currently supported by the Google Home service as compatible hubs.

My Wiring only has two wires. Will this work for me?

The Add-On Switch requires three wires: a neutral wire (typically bundled together with other neutrals in the back of the box), a traveler wire (coming immediately from the Primary Z-Wave, ZigBee, or Bluetooth Switch), and a ground wire. If you need further assistance regarding all three connections, you are unfamiliar or need further assistance, it will be necessary to contact a licensed electrician for installation assistance.

Can this be used by itself with a SmartThings, Wink, Iris, or other Home Automation Hub?

The Add-on switch (12723) is not a standalone switch, and cannot work by itself in any situation. It is designed to physically connect to a GE In-Wall Smart Lighting Control Switch, Dimmer, or Fan Control in a multi-switch configuration through the traveler wire e.g. 3 or 4-Way configuration. If you are installing a single pole switch you will need a Z-Wave, ZigBee, or Bluetooth In-Wall primary switch. For more information about the Add-On Switch, please visit www.ezaddonswitch.com.

Description

Transform any home into a smart home with the GE Smart Lighting Control Add-On Switch. This Add-On Switch replaces your current switch, uses existing wiring and provides your home with ultimate flexibility when combined with a GE Z-Wave, ZigBee or Bluetooth In-Wall Smart Switch, Dimmer or Fan Control. The GE Smart Lighting Control Switch operates as your home automation system primary control, requiring three-way or four-way wiring configurations. Three-way wiring configuration turns the light or appliance on or off from two separate locations. Four-way wiring configuration turns the light or appliance on or off from three separate locations. With an interchangeable paddle design, the paddle switch matches most standard wall plates and home decor, and includes white and light almond paddles that will match most standard wall plates (wall plate not included). This product is ALEXA COMPATIBLE, however, it REQUIRES AN ALEXA SUPPORTED HUB for voice control with Echo Products (Alexa device and hub sold separately). **This product CANNOT connect directly with ECHO PLUS (Only ZigBee products can connect directly to Echo Plus).**

Features

  • Provides ultimate flexibility with your GE In-wall Smart Switch, Dimmer or Fan Control
  • Requires a GE Home Automation Switch, NOT a standalone switch
  • Includes white and light almond paddles that will match most standard wall plates (wall plate not included)
  • Screw terminal installation provides improved space efficiency when replacing existing switches compared to flying leads (Neutral connection required for installation)
  • Compatible with GE In-Wall Z-Wave, Bluetooth, and ZigBee Switches, Dimmers and Fan Controls