Revolutionary, patent-pending design – QuickFit and SimpleWire technologies offer groundbreaking home automation features. Unique advancements make the smart controls easier to install and more reliable than ever.
QuickFit – Improved components reduced the housing depth by up to 20% compared to previous Z-Wave models and eliminated the need for heat tabs. QuickFit enhancements are the ideal smart solution for older-style switch boxes, multi-gang configurations or any other application with limited space.
SimpleWire – Auto-detecting line/load terminals support fast installation by identifying line and load wires and configuring the dimmer accordingly. Dual ground ports, which are offset to avoid switch box mounting screws, support daisy-chaining in multi-switch setups.
Voice control – Enjoy the convenience of voice control with Google Assistant or Amazon Alexa when connected through a compatible Z-Wave hub.
Switch upgrade – Easily replace any standard in-wall switch equipped with a neutral wire to remotely turn ON/OFF, adjust lighting brightness and create schedules for a wide range of fixtures.
Full-range dimmability – The dimmer adjusts brightness levels of dimmable LED, CFL, incandescent and halogen lights from 0-100 percent to reduce energy costs and improve bulb life.
Changeable paddles – The dimmer features a removable white rocker-style paddle. Black, brown, ivory and light almond options are also available.
Multi-switch compatible – The smart device operates perfectly on its own or seamlessly integrates into multi-switch setups when paired with compatible add-on switches from UltraPro, GE, Jasco, Enbrighten and Honeywell. Up to four add-on switches can be connected to the same light, fan or appliance.
Range extender – The in-wall Z-Wave dimmer repeats the signal from your hub or other Z-Wave device to extend wireless range by up to 150ft.
About Z-Wave Plus with S2 security and SmartStart
Z-Wave Plus 500 series with S2 security and SmartStart takes advantage of the latest benefits of Z-Wave while being safer and simpler than ever. Experience enhanced protection and convenience including:
Improved battery life and up to 50 percent greater wireless range.
Over-the-air updates and enhanced internal memory.
QR codes with unique, industry-standard secure key exchange to add a layer of 128-bit encryption.
Effortless device pairing to Z-Wave S2 and SmartStart certified gateways.
Backward compatible with all generations of Z-Wave devices.
Adjust your automation with the UltraPro Z-Wave In-Wall Smart Dimmer with QuickFit™ and SimpleWire™. When paired with a compatible hub, the hardwired smart dimmer operates wall, ceiling and accent lighting through individual commands and programmed settings. Wirelessly control and schedule indoor or outdoor fixtures for effortless management of your home. Your automation possibilities are seemingly infinite when connected to hubs from Ring, Wink, SmartThings, HomeSeer, Vera, Nexia and more.
Control from anywhere!
The smart dimmer gives you wireless control of your hardwired, dimmable lights from any mobile device, computer or Z-Wave enabled remote via a Z-Wave Certified gateway/hub.
Control your lights via:
Laptop / Desktop
Manually at the switch
Full-Range Dimming - 0 to 100%
Give your space the perfect amount of light with the ability to customize the brightness levels from 0 to 100%.
Dimmable bulbs required - may experience flickering, buzzing, or inconsistent/no dimming at all if non-dimmable bulbs are used.
Schedule your lighting around your day
Automating you lights will not only make your life easier but it will also save energy, cut costs, and boost your home’s security.
Schedule lights for:
Your morning routine
When everyone is away from home
Dim lights as a signal to get ready for bed
Set lights to turn on at sunset
Set lights to turn on/off at different times while you are away to make your house look lived in
Replace your existing wall switch in as little as 15 minutes!
Neutral wire is REQUIRED - Neutral jumper wire is included. Please make sure your home has a neutral wire before purchasing the Smart Dimmer.
Fits Standard Decora Wallplates - Wallplate NOT Included
Includes white and light almond paddles to match any home décor
Manually Control / Dim at the Switch
Lighting can be controlled at the switch in the event that you do not have access to your mobile device, need to use the device outside of your set schedules, or have guests visiting your home.
ON - tap the top button
Off - tap the bottom button
Dim Up - hold top button until you reach your desired light level
Dim Down - hold bottom button until you reach your desired light level
Voice Control with Alexa & Google
Control and dim your connected device with only your voice!
Z-Wave Certified Hub must be Alexa compatible.
Certified to work with Amazon Alexa
Works with Google Assistant
Alexa / Echo / Google Assistant devices sold separately
NOT directly compatible with ECHO PLUS. Will work through Z-Wave certified HUB only.
Works with all Z-Wave Compatible Hubs
Harmony Home Hub Extender
Fibaro, Vivint, and ADT
Electrical Ratings and Product Specifications
Smart Dimmer functions as a Z-Wave range extender/repeater and strengthens your homes network!
Maximum Load: 600W Incandescent 150W CFL/LED
Wireless Range: 150 Feet Line Of Sight
Operating Temperature: 32-104 Degrees Fahrenheit
Neutral Wire Required
California Title 24 / Title 20 Compliant
Easy to Install - Neutral Wire is Required
The Smart Dimmer can be used as a single switch (see top half of the image above) or multi-switch (up to 5 different switches - bottom half of image above)
Why use an Add-On or multi-switch installation? Using an add-on switch will allow you to control your Smart Switch from up to 5 different switch locations which can be very convenient if installed in hallways, kitchens, living rooms, or other large rooms with multiple switches controlling 1 light.
With our Honeywell Add-On switch you will have full optimal control of the Smart Dimmer unlike other products on the market that limit you to only On/Off functionality at the Add-On switch.
(NEUTRAL WIRE REQUIRED) – (Neutral jumper wire included) ensure your home has a neutral white wire before purchasing Smart Dimmer or Add-On Switch.
Multi-Switch Installation Requires Honeywell Add-On Switch 39350 - will not function with other non-Honeywell add-on switches
Technical Support Team available should you need additional assistance (see user manual for number.)
HOME AUTOMATION PROTOCOLS AND LANGUAGES 101: AN INTRODUCTION
In this smart home guide, you'll discover:
Find out more about automation and how it can add value to the home.
Discover the differences between Z-Wave, Zigbee, Wi-Fi and Bluetooth.
Learn how to make the right selection for your building needs.