Code list 3

1. PRESS AND HOLD DOWN THE SETUP BUTTON UNTIL THE REMOTE’S RED LIGHT TURNS ON.

2. PRESS AND RELEASE THE CHOSEN DEVICE BUTTON (E.G., TV, CBL, DVD, AUD).

3. ENTER THE FIRST 4-DIGIT CODE FOR YOUR DEVICE. THE RED LIGHT WILL TURN OFF.

4. POINT THE REMOTE AT THE DEVICE AND TEST THE BUTTONS. IF THEY DON’T WORK AS EXPECTED, REPEAT STEPS 4-7 WITH THE NEXT CODE FOR YOUR DEVICE.

5. REPEAT THIS PROCESS FOR EACH DEVICE YOU WISH TO CONTROL.

 

*Note: Some codes may operate only a few device functions, so test other codes for more functionality.